1301
Your SkyTrak Launch Monitor has multiple ways to connect to the SkyTrak Application. Direct Mode, Network Mode, and USB Mode (Windows PC only). Launch your SkyTrak Application and select the SkyTrak Button to learn more about each connection type.
Setting up USB Mode (Windows PC Only):
- With the Launch Monitor off, connect the USB cable from your Windows PC to your SkyTrak Launch Monitor.
- Launch the SkyTrak Application on your PC, and power on your SkyTrak Launch Monitor.
Once connected, the application will display 
Setting up Direct Mode:
- Launch your SkyTrak Application.
- Power on your SkyTrak Launch Monitor and wait several seconds until the lights on front show
. - Connect your Windows PC or Mobile Device to the SkyTrak_XXXXXXXXX network. It may take several seconds to appear.
- Return to your SkyTrak Application.
Once connected, the application will display 
After connecting via Direct Mode, the SkyTrak Application will ask if you would like to continue to setting Network Mode.
Setting up Network Mode:
- Launch your SkyTrak Application,
- Turn on your SkyTrak Launch Monitor and select the SkyTrak button to open the connection menu. Select Network Mode.
- The SkyTrak Application will begin setting up a Direct Mode Connection. Follow the instructions in the Application and select Proceed to Network Mode when complete.
- Choose the blue Network Setup Wizard button, followed by Scan for Networks on the new page.
- Once scanning completes, click the box under Selected Network, and select your preferred Wi-Fi network. If you do not see your network, you can manually add it via the button below.
- After selecting your preferred Wi-Fi network, enter the password in the Network Password box, then select Connect to network.
Your SkyTrak Launch Monitor will now attempt to connect to your Wi-Fi network. When the middle light turns solid yellow, the SkyTrak Launch Monitor has successfully connected, and you may return your Mobile Device or Windows PC back to your preferred Wi-Fi network if it does not do so automatically.
For additional LED configurations and errors, reference your Owners Manual.
Once both devices are connected to your preferred Wi-Fi network, the application will display 
